"water cooled furnace"
- 24 Найденные элементы
6.3 MVA до 63 MVA Поточная дуговая печь для производства высокоуглеродного феррохрома
6.3 MVA to 63 MVA High Carbon Ferrochrome Submerged Arc Furnace Ferrochrome is classified into high carbon ferrochrome, medium carbon ferrochrome, low carbon ferrochrome, and micro carbon ferrochrome based on carbon content. High Carbon Ferrochrome is a ferroalloy with a carbon content of 4%–8%, ...
70T - 120T Электрическая дуговая печь ЭЭФ Большая печь ЭЭФ Промышленная
Large-Scale Electric Arc Furnace (70t - 120t) Used in large integrated steel plants for mass production of ordinary carbon steel and high-quality alloy steel. According to the Chinese national standard GB/T 10067.21-2015, an AC EAF with a rated capacity of 70 tons or more is defined as a "large" ...
Железнокремниевая печь 6,3 МВА до 45 МВА Погруженная электрическая дуговая печь
6.3 MVA to 45 MVA Ferrosilicon Submerged Arc Furnace The submerged arc furnace (SAF) utilizes high-temperature combustion technology to maximize the thermal efficiency of coal during production. This results in improved energy utilization and reduced overall energy consumption. In terms of ...
Ферроникелевая потопная дуговая печь 6.3MVA до 45MVA Редукционная печь
6.3 MVA to 45 MVA Ferronickel Submerged Arc Furnace I. Overview The ferronickel submerged arc furnace (also known as a reduction furnace) is the core equipment specifically designed for smelting ferronickel alloy. This series covers capacities from 6.3 MVA to 45 MVA, encompassing medium, medium...
Проводящие SAF Медная контактная обувь Подводная дуговая печь Запчасти
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface...
Выше 120Т Электрическая дуговая печь 63000кВА-80000кВА Эфная печь Ультра-большой масштаб
Ultra Large-Scale Electric Arc Furnace (Above 120t) e.g., 150t, 200t I. Overview Mega-scale steel complexes focusing on the lowest possible production cost per ton. These furnaces represent the pinnacle of EAF technology. They feature the largest shell diameters and most powerful transformers (up to ...
Подводная дуговая печь Система короткой сети Печь SAF / части EAF
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical ...
IP65 Приборы для измерения температуры Устройство для измерения температуры дуговой печи
Temperature Measurement Instruments Used for Arc Furnace Temperature is one of the most critical parameters in metallurgical furnace control. SAF and EAF require temperature measurement at multiple points including furnace chamber temperature, flue gas temperature, cooling water temperature, and ...
Ладочная дуговая печь LF 15T ~ 300T Ладочная печь для переработки 3MVA-48MVA
Ladle Electric Arc Furnace(LF 15~300t) Refining furnaces, also known as secondary refining furnaces or ladle refining equipment, are used for deep treatment of molten steel from primary furnaces (EAF, converter, etc.). They aim to improve molten steel purity, adjust composition and temperature, and ...
