"water cooled furnace"
- 24 Items Gevonden
6.3 MVA tot 63 MVA onderwaterboogoven voor de productie van ferrochroom met een hoog koolstofgehalte
6.3 MVA to 63 MVA High Carbon Ferrochrome Submerged Arc Furnace Ferrochrome is classified into high carbon ferrochrome, medium carbon ferrochrome, low carbon ferrochrome, and micro carbon ferrochrome based on carbon content. High Carbon Ferrochrome is a ferroalloy with a carbon content of 4%–8%, mainly used in the production of stainless steel and tool steel. Due to its high carbon content, high carbon ferrochrome is suitable for improving the hardness and wear resistance of
70T - 120T EAF Elektrische boogoven Grootschalige EAF-ovens Industrieel
Large-Scale Electric Arc Furnace (70t - 120t) Used in large integrated steel plants for mass production of ordinary carbon steel and high-quality alloy steel. According to the Chinese national standard GB/T 10067.21-2015, an AC EAF with a rated capacity of 70 tons or more is defined as a "large" furnace. These furnaces almost exclusively operate at Ultra-High Power (UHP) levels to maximize productivity. The HX-100 series is a typical example. The high power input significantl
Ferrosiliciumoven 6,3 MVA tot 45 MVA ondergedompelde elektrische boogoven
6.3 MVA to 45 MVA Ferrosilicon Submerged Arc Furnace The submerged arc furnace (SAF) utilizes high-temperature combustion technology to maximize the thermal efficiency of coal during production. This results in improved energy utilization and reduced overall energy consumption. In terms of production efficiency, the furnace is equipped with an advanced automated control system that enables intelligent operation. The high degree of automation throughout the production process
Ferronickel ondergedompelde boogoven 6,3 MVA tot 45 MVA reductieoven
6.3 MVA to 45 MVA Ferronickel Submerged Arc Furnace I. Overview The ferronickel submerged arc furnace (also known as a reduction furnace) is the core equipment specifically designed for smelting ferronickel alloy. This series covers capacities from 6.3 MVA to 45 MVA, encompassing medium, medium-large, and large ferronickel production units. Ferronickel is a key raw material for stainless steel production. The ferronickel furnace reduces nickel and iron oxides in laterite
Geleidende SAF koperen contactschoen reserveonderdelen voor ondergedompelde boogovens
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface, transmitting the large current from the short network to the electrode, while withstanding harsh conditions such as furnace mouth high temperature, thermal radiation, and
Boven 120T elektrische boogoven 63000kVA-80000kVA Eaf oven ultra grote schaal
Ultra Large-Scale Electric Arc Furnace (Above 120t) e.g., 150t, 200t I. Overview Mega-scale steel complexes focusing on the lowest possible production cost per ton. These furnaces represent the pinnacle of EAF technology. They feature the largest shell diameters and most powerful transformers (up to 80,000 kVA or more). They are designed for ultra-high productivity, often with a fully automated process and advanced environmental control systems. Ultra-large electric arc
Onderwaterboogoven Korte netwerksysteem SAF-oven / EAF-onderdelen
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical energy into the furnace. The design and manufacturing quality of the short network directly affect the power efficiency, three-phase balance, and operational stability of the SAF.
IP65 Temperatuursmetingsinstrumenten Boogoven Temperatuursmetingsinstrument
Temperature Measurement Instruments Used for Arc Furnace Temperature is one of the most critical parameters in metallurgical furnace control. SAF and EAF require temperature measurement at multiple points including furnace chamber temperature, flue gas temperature, cooling water temperature, and molten steel/hot metal temperature. 1. Thermocouple Type Measuring Range Features Applications Type K -200~1300℃ Good linearity, low cost, moderate oxidation resistance Furnace
Ladle Arc Furnace LF 15T~300T Ladle Furnace Raffinage 3MVA-48MVA
Ladle Electric Arc Furnace(LF 15~300t) Refining furnaces, also known as secondary refining furnaces or ladle refining equipment, are used for deep treatment of molten steel from primary furnaces (EAF, converter, etc.). They aim to improve molten steel purity, adjust composition and temperature, and meet the production requirements of continuous casting and high-quality steel. The LF furnace is the most widely used secondary refining equipment, with specifications covering 6t
