"electric submerged arc furnace"
- 14 Mục đã tìm thấy
6300KVA ~ 33000KVA lò cung chìm Silicon Industrial Electric Arc Furnace
6.3 MVA~33 MVA Industrial Silicon Submerged Arc Furnace Industrial silicon, also referred to as crystalline or metallic silicon, serves as a fundamental material across a wide range of modern industrial sectors. Its applications extend to industries such as electronics, steel manufacturing, optics, automotive production, chemical processing, metallurgy, and defense. As technological development progresses, new applications for industrial silicon continue to emerge, particular
Lò hồ quang chìm Silicomanganese 6,3 MVA đến 45 MVA cho quá trình luyện kim
6.3 MVA to 45 MVA Silicomanganese Submerged Arc Furnace Silicomanganese is a ferroalloy composed primarily of manganese, silicon, iron, and trace amounts of carbon along with other elements. It is one of the most widely used and high-volume alloys in the ferroalloy industry. In steelmaking, manganese-silicon alloy serves as a compound deoxidizer and is also employed as a reducing agent in the production of medium- and low-carbon ferromanganese, as well as in the manufacture
6.3 MVA đến 63 MVA lò cung chìm để sản xuất ferrochrome carbon cao
6.3 MVA to 63 MVA High Carbon Ferrochrome Submerged Arc Furnace Ferrochrome is classified into high carbon ferrochrome, medium carbon ferrochrome, low carbon ferrochrome, and micro carbon ferrochrome based on carbon content. High Carbon Ferrochrome is a ferroalloy with a carbon content of 4%–8%, mainly used in the production of stainless steel and tool steel. Due to its high carbon content, high carbon ferrochrome is suitable for improving the hardness and wear resistance of
Lò hồ quang chìm Ferronickel Lò khử 6,3 MVA đến 45 MVA
6.3 MVA to 45 MVA Ferronickel Submerged Arc Furnace I. Overview The ferronickel submerged arc furnace (also known as a reduction furnace) is the core equipment specifically designed for smelting ferronickel alloy. This series covers capacities from 6.3 MVA to 45 MVA, encompassing medium, medium-large, and large ferronickel production units. Ferronickel is a key raw material for stainless steel production. The ferronickel furnace reduces nickel and iron oxides in laterite
Các bộ phận phụ tùng lò cung chìm giày tiếp xúc đồng SAF dẫn điện
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface, transmitting the large current from the short network to the electrode, while withstanding harsh conditions such as furnace mouth high temperature, thermal radiation, and
Hệ thống bồi thường điện áp thấp 1000V cho lò cung chìm
SAF Low Voltage Compensation System Low voltage compensation systems are mainly used in 0.4kV and 0.69kV distribution systems, suitable for refining furnaces, auxiliary equipment, and workshop distribution. National standard GB/T 15576-2020 specifies technical requirements for low-voltage reactive power compensation assemblies.I. General Parameters of Low Voltage Compensation DeviceParameter SpecificationRated Voltage≤1000V (or 1140V) Frequency≤1000 Hz Dynamic Response
Lò hồ quang chìm Hệ thống mạng ngắn Lò SAF / Bộ phận EAF
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical energy into the furnace. The design and manufacturing quality of the short network directly affect the power efficiency, three-phase balance, and operational stability of the SAF.
Nắp bảo vệ được làm mát bằng nước SAF được sử dụng cho lò cung chìm / điện
SAF Spare Part: High-Temperature Resistant Water-Cooled Protective Cover 1. Introduction The water-cooled protective cover is a key protective component of the electrode system in submerged arc furnaces (SAF). Installed at the lower part of the electrode, it isolates high-temperature furnace gas and thermal radiation, protects the electrode bottom device from burning, and removes heat through circulating cooling water to ensure stable operation of equipment under high
Cửa lò cung điện canxi cacbit 12,5MVA 25MVA 33MVA 40,5MVA 63MVA
12.5 MVA to 63 MVA Calcium Carbide Submerged Arc Furnace The calcium carbide submerged arc furnace (also known as a reduction furnace) is the core equipment for producing calcium carbide. This series covers capacities from 12.5 MVA to 63 MVA, encompassing medium-large, large, and ultra-large calcium carbide production units. These furnaces generally adopt a fully sealed design, achieving the modern production requirements of energy saving, environmental protection, high
