"electric submerged arc furnace"
- 14 Найденные элементы
6300KVA~33000KVA Поточная дуговая печь Кремниевая промышленная электрическая дуговая печь
6.3 MVA~33 MVA Industrial Silicon Submerged Arc Furnace Industrial silicon, also referred to as crystalline or metallic silicon, serves as a fundamental material across a wide range of modern industrial sectors. Its applications extend to industries such as electronics, steel manufacturing, optics, ...
Силикомангановая погруженная дуговая печь от 6,3 МВА до 45 МВА для металлургических процессов
6.3 MVA to 45 MVA Silicomanganese Submerged Arc Furnace Silicomanganese is a ferroalloy composed primarily of manganese, silicon, iron, and trace amounts of carbon along with other elements. It is one of the most widely used and high-volume alloys in the ferroalloy industry. In steelmaking, ...
6.3 MVA до 63 MVA Поточная дуговая печь для производства высокоуглеродного феррохрома
6.3 MVA to 63 MVA High Carbon Ferrochrome Submerged Arc Furnace Ferrochrome is classified into high carbon ferrochrome, medium carbon ferrochrome, low carbon ferrochrome, and micro carbon ferrochrome based on carbon content. High Carbon Ferrochrome is a ferroalloy with a carbon content of 4%–8%, ...
Ферроникелевая потопная дуговая печь 6.3MVA до 45MVA Редукционная печь
6.3 MVA to 45 MVA Ferronickel Submerged Arc Furnace I. Overview The ferronickel submerged arc furnace (also known as a reduction furnace) is the core equipment specifically designed for smelting ferronickel alloy. This series covers capacities from 6.3 MVA to 45 MVA, encompassing medium, medium...
Проводящие SAF Медная контактная обувь Подводная дуговая печь Запчасти
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface...
Система компенсации низкого напряжения 1000 В для погруженной дуговой печи
SAF Low Voltage Compensation System Low voltage compensation systems are mainly used in 0.4kV and 0.69kV distribution systems, suitable for refining furnaces, auxiliary equipment, and workshop distribution. National standard GB/T 15576-2020 specifies technical requirements for low-voltage reactive ...
Подводная дуговая печь Система короткой сети Печь SAF / части EAF
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical ...
Защитная крышка с водяным охлаждением SAF, используемая для подводной / электрической дуговой печи
SAF Spare Part: High-Temperature Resistant Water-Cooled Protective Cover 1. Introduction The water-cooled protective cover is a key protective component of the electrode system in submerged arc furnaces (SAF). Installed at the lower part of the electrode, it isolates high-temperature furnace gas and ...
Электрическая дуговая печь карбида кальция 12,5 МВА 25 МВА 33 МВА 40,5 МВА 63 МВА
12.5 MVA to 63 MVA Calcium Carbide Submerged Arc Furnace The calcium carbide submerged arc furnace (also known as a reduction furnace) is the core equipment for producing calcium carbide. This series covers capacities from 12.5 MVA to 63 MVA, encompassing medium-large, large, and ultra-large calcium ...
