Các bộ phận lò cung điện
Bộ phận phụ tùng SAF
SAF Spare Part: High-Conductivity Copper Water-Cooled Heat Shield The water-cooled heat shield is an important protective component of the electrode system in submerged arc furnaces (SAF). It forms a cylindrical barrier around the electrode, isolating high-temperature thermal radiation and dust inside the furnace, protecting the electrode holding system (copper shoes, pressure rings, etc.) from burning. It is one of the key spare parts ensuring continuous and stable operation
Lửa cung chìm Vòng đáy thép không gỉ Loại đồng
Stainless Steel or Copper Type Bottom Ring The bottom ring is one of the core components of the electrode combined holder in submerged arc furnaces (SAF). Located at the lowest end of the electrode holder, it undertakes multiple functions including protecting the electrode system, fixing the heat shield, and providing insulation protection. Its performance directly affects the stable operation of SAF and the frequency of shutdown maintenance. 1. Definition The bottom ring is
Các thông số kỹ thuật đầy đủ của dây cáp làm mát bằng nước SAF cho hệ thống mạng lưới ngắn lò
Full Specifications Water-Cooled Cable used for Submerged Arc Furnace The water-cooled cable is a key component of the short network system in submerged arc furnaces (SAF). It is used to connect the secondary terminal of the transformer to the movable copper pipe (copper shoe) inside the furnace, transmitting large currents ranging from thousands to tens of thousands of amperes. As it operates under high temperature and strong electromagnetic fields for extended periods, and
Tăng áp tùy chỉnh SAF lò đệm Vòng lò cung điện Thành phần
SAF Spare Part: High-Quality Customization Pressure Ring 1. Classification of Pressure Rings The pressure ring is one of the core components of the electrode holder in submerged arc furnaces (SAF). It is responsible for pressing the copper shoe against the electrode, ensuring uniform current transmission from the copper shoe to the electrode. The performance of the pressure ring directly affects the operational reliability and smelting indicators of the SAF. The pressure ring
Các bộ phận phụ tùng lò cung chìm giày tiếp xúc đồng SAF dẫn điện
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface, transmitting the large current from the short network to the electrode, while withstanding harsh conditions such as furnace mouth high temperature, thermal radiation, and
Bộ phận thay thế phanh giữ điện cực SAF cho hệ thống trượt điện cực
SAF Electrode Holding Brake The brake is the core component of the electrode slipping system in submerged arc furnaces (SAF), responsible for clamping or releasing the electrode, cooperating with the slipping cylinder to complete the downward feeding of the electrode. Its performance directly affects the reliability of electrode slipping, furnace condition stability, and smelting power consumption. I. Introduction The brake is a mechanical device in the electrode slipping
Lò hồ quang chìm Hệ thống mạng ngắn Lò SAF / Bộ phận EAF
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical energy into the furnace. The design and manufacturing quality of the short network directly affect the power efficiency, three-phase balance, and operational stability of the SAF.
Nắp bảo vệ được làm mát bằng nước SAF được sử dụng cho lò cung chìm / điện
SAF Spare Part: High-Temperature Resistant Water-Cooled Protective Cover 1. Introduction The water-cooled protective cover is a key protective component of the electrode system in submerged arc furnaces (SAF). Installed at the lower part of the electrode, it isolates high-temperature furnace gas and thermal radiation, protects the electrode bottom device from burning, and removes heat through circulating cooling water to ensure stable operation of equipment under high
