"furnace equipment"
- 27 발견 된 물건
레이들 아크로 LF 15T~300T 레이들로 정련 3MVA-48MVA
Ladle Electric Arc Furnace(LF 15~300t) Refining furnaces, also known as secondary refining furnaces or ladle refining equipment, are used for deep treatment of molten steel from primary furnaces (EAF, converter, etc.). They aim to improve molten steel purity, adjust composition and temperature, and meet the production requirements of continuous casting and high-quality steel. The LF furnace is the most widely used secondary refining equipment, with specifications covering 6t
물에 잠긴/전기 아크로에 사용되는 SAF 물에 의하여 냉각되는 보호 덮개
SAF Spare Part: High-Temperature Resistant Water-Cooled Protective Cover 1. Introduction The water-cooled protective cover is a key protective component of the electrode system in submerged arc furnaces (SAF). Installed at the lower part of the electrode, it isolates high-temperature furnace gas and thermal radiation, protects the electrode bottom device from burning, and removes heat through circulating cooling water to ensure stable operation of equipment under high
자동화 DCS 제어 시스템 SAF 오븐 제어 시스템 현장에서 테스트
SAF Furnace Control System DCS Automation Control The basic automation level (L1) is the core execution layer of metallurgical control systems, responsible for equipment sequence control, loop regulation, and data acquisition. For submerged arc furnaces and electric arc furnaces, the L1 control system mainly includes two platforms: Programmable Logic Controller (PLC) and Distributed Control System (DCS). The control core of submerged arc furnaces lies in electrode control,
1000V 저전압 보상 시스템 잠수 된 활 오븐
SAF Low Voltage Compensation System Low voltage compensation systems are mainly used in 0.4kV and 0.69kV distribution systems, suitable for refining furnaces, auxiliary equipment, and workshop distribution. National standard GB/T 15576-2020 specifies technical requirements for low-voltage reactive power compensation assemblies.I. General Parameters of Low Voltage Compensation DeviceParameter SpecificationRated Voltage≤1000V (or 1140V) Frequency≤1000 Hz Dynamic Response
잠수 된 활 오븐의 고전압 보상 장비
SAF High Voltage Compensation System High Voltage Compensation System Used for Submerged Arc Furnace I. Overview Compensation equipment is a key component in metallurgical power supply systems, used to improve power factor, stabilize voltage, filter harmonics, reduce line losses, and ensure stable operation of impact loads such as EAFs and refining furnaces. Based on voltage level, compensation principle, and functional characteristics, they are mainly classified into the
RH Ruhrstahl Heraeus 진공 제거 정제 오븐 80T ~ 320T
Ruhrstahl Heraeus (RH) Vacuum Degassing Refining Furnace (80t~320t) I. Overview The RH vacuum circulation degassing process (RH process) is a highly efficient secondary refining technology for molten steel. It was jointly developed by Ruhrstahl and Heraeus in Germany in 1957, with the equipment name derived from the initials of the two companies. This technology utilizes the vacuum circulation principle to perform various refining treatments on molten steel, including
SAF 굴뚝 가스 정화 시스템 증기 처리 공장 고효율
SAF Flue Gas Purification System/ Fume Treatment Plant During the smelting process, electric arc furnaces generate large amounts of high-temperature, high-dust-content flue gas, which must be equipped with efficient dedusting systems to meet environmental emission requirements. Baghouse dust collectors are the mainstream equipment for arc furnace dust removal, achieving dust removal efficiencies exceeding 99.5% and controlling outlet emissions to ≤10 mg/m³ or even lower.
양압 먼지 수집기 시스템 산업용 바그하우스 먼지 수집기
Positive Pressure Baghouse Dust Collection System 1. Definition & Working Principle Positive pressure dust collection system refers to the configuration where the fan is installed before the dust collector. The fan pushes the dust-laden flue gas into the dust collector, where the gas is filtered through filter bags under positive pressure, and the purified gas is directly discharged or sent for subsequent treatment. The fan pushes dust-laden flue gas under positive pressure
SAF 및 EAF 매개변수 전기 측정 장비 0~999MW 전력
Electrical Parameter Measurement Instruments SAF and EAF are high-current, low-voltage equipment requiring precise measurement of primary and secondary side voltage, current, power, power factor and other electrical parameters for power management and process optimization. 1. CT and VT Type Primary Rating Secondary Output Accuracy Class Applications Current Transformer (CT) 100~100,000A 5A/1A/4~20mA 0.2/0.5/1.0 Primary side high current measurement, secondary current
