오븐 도구
아크로를 위한 열전대/적외선 센서 레벨 측정 기기
Level Measurement Instruments Used for Arc Furnace SAF and EAF require monitoring of circulating water tank level, gas holder level, and bin stock level to ensure continuous and stable system operation. 1. Level Meter Type Measuring Principle Measuring Range Accuracy Applications Ultrasonic Level Meter Sound wave reflection 0~20m 0.5%FS Water tank level, bin stock level Radar Level Meter Electromagnetic wave reflection 0~30m ±2mm High temp, high pressure, volatile liquid
SAF 및 EAF 매개변수 전기 측정 장비 0~999MW 전력
Electrical Parameter Measurement Instruments SAF and EAF are high-current, low-voltage equipment requiring precise measurement of primary and secondary side voltage, current, power, power factor and other electrical parameters for power management and process optimization. 1. CT and VT Type Primary Rating Secondary Output Accuracy Class Applications Current Transformer (CT) 100~100,000A 5A/1A/4~20mA 0.2/0.5/1.0 Primary side high current measurement, secondary current
가스 조성 분석기 용광로 장비 산업용 측정 장비 RS485
Gas Composition Analysis InstrumentsSAF gas contains combustible gases including CO, H₂, CH₄, etc. The closed furnace gas purification and recovery system requires real-time gas composition monitoring to ensure safe operation and recovery efficiency. 1. Gas AnalyzerTypeMeasured ComponentsRangeAccuracyResponse TimeApplicationsInfrared Gas AnalyzerCO, CO₂, CH₄0~100%±1%FS≤15sSAF gas composition online analysisZirconia Oxygen AnalyzerO₂0~25%±1%FS≤5sFlue gas oxygen content
아크 오븐 흐름 측정 기기 4-20mA 산업 측정 장비
Flow Measurement Instruments Used for Arc Furnace Flow monitoring is critical for cooling water systems, gas conveying systems, and energy management. SAF and EAF require monitoring of cooling water flow, gas flow, oxygen flow, and argon flow. 1. Flow Meter Type Measuring Principle Applicable Media Turndown Ratio Accuracy Applications Electromagnetic Flowmeter Faraday's Law Conductive liquid (≥2.5μS/cm) 10:1~100:1 0.5%~1.0% Cooling water, conductive liquid flow Vortex
SAF 및 EAF 용광로 압력 측정 장비 220V / 380V
Pressure Measurement InstrumentsSAF and EAF require monitoring of key pressure parameters including furnace chamber pressure, gas pressure, cooling water pressure, and hydraulic system pressure to ensure stable furnace pressure, equipment safety, and proper process operation.2.1 Pressure Transmitter TypeMeasuring PrincipleMeasuring RangeAccuracyOutput SignalApplicationsCapacitive Pressure TransmitterCapacitance change-0.1~40MPa0.075%~0.1%FS4~20mA+HARTGeneral pressure,
IP65 온도 측정 장비 아크로 온도 측정 장치
Temperature Measurement Instruments Used for Arc Furnace Temperature is one of the most critical parameters in metallurgical furnace control. SAF and EAF require temperature measurement at multiple points including furnace chamber temperature, flue gas temperature, cooling water temperature, and molten steel/hot metal temperature. 1. Thermocouple Type Measuring Range Features Applications Type K -200~1300℃ Good linearity, low cost, moderate oxidation resistance Furnace
