"electric arc furnace components"
- 8 Oggetti trovati
Pressione di personalizzazione Forno SAF Ring Forno ad arco elettrico Componenti
SAF Spare Part: High-Quality Customization Pressure Ring 1. Classification of Pressure Rings The pressure ring is one of the core components of the electrode holder in submerged arc furnaces (SAF). It is responsible for pressing the copper shoe against the electrode, ensuring uniform current transmission from the copper shoe to the electrode. The performance of the pressure ring directly affects the operational reliability and smelting indicators of the SAF. The pressure ring
70T - 120T Forno ad arco elettrico EAF Forno ad arco elettrico a grande scala EAF
Large-Scale Electric Arc Furnace (70t - 120t) Used in large integrated steel plants for mass production of ordinary carbon steel and high-quality alloy steel. According to the Chinese national standard GB/T 10067.21-2015, an AC EAF with a rated capacity of 70 tons or more is defined as a "large" furnace. These furnaces almost exclusively operate at Ultra-High Power (UHP) levels to maximize productivity. The HX-100 series is a typical example. The high power input significantl
0.5T - 30T EAF Piccolo forno ad arco elettrico 2200kVA Mini forno ad arco
Small-Scale Electric Arc Furnace (Approx. 0.5t - 30t) Small-scale electric arc furnaces (EAFs) in the 0.5 to 30 ton range are the entry-level choice for many small foundries, specialty steel producers, and research and development institutions. They offer high flexibility, lower initial investment, and the ability to produce a wide variety of high-quality steels and alloys, making them an ideal solution for market-oriented, small-batch, and multi-variety production. I.
Coperchio protettivo raffreddato ad acqua SAF utilizzato per forno ad arco elettrico / sommerso
SAF Spare Part: High-Temperature Resistant Water-Cooled Protective Cover 1. Introduction The water-cooled protective cover is a key protective component of the electrode system in submerged arc furnaces (SAF). Installed at the lower part of the electrode, it isolates high-temperature furnace gas and thermal radiation, protects the electrode bottom device from burning, and removes heat through circulating cooling water to ensure stable operation of equipment under high
Forno ad arco immerso in ferronicchio da 6,3 MVA a 45 MVA
6.3 MVA to 45 MVA Ferronickel Submerged Arc Furnace I. Overview The ferronickel submerged arc furnace (also known as a reduction furnace) is the core equipment specifically designed for smelting ferronickel alloy. This series covers capacities from 6.3 MVA to 45 MVA, encompassing medium, medium-large, and large ferronickel production units. Ferronickel is a key raw material for stainless steel production. The ferronickel furnace reduces nickel and iron oxides in laterite
Ricambi per forno ad arco sommerso con calzatura di contatto a rame SAF conduttiva
SAF Spare Part: Copper Contact Shoe I. Introduction The copper contact shoe is a key conductive component in the electrode holding system of submerged arc furnaces (SAF). It is usually made of high-purity copper, installed at the lower part of the electrode, tightly attached to the electrode surface, transmitting the large current from the short network to the electrode, while withstanding harsh conditions such as furnace mouth high temperature, thermal radiation, and
Forno ad arco sommerso Sistema a rete corta Forno SAF / Parti EAF
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical energy into the furnace. The design and manufacturing quality of the short network directly affect the power efficiency, three-phase balance, and operational stability of the SAF.
Cable raffreddato ad acqua SAF per sistema di rete corta forno
Full Specifications Water-Cooled Cable used for Submerged Arc Furnace The water-cooled cable is a key component of the short network system in submerged arc furnaces (SAF). It is used to connect the secondary terminal of the transformer to the movable copper pipe (copper shoe) inside the furnace, transmitting large currents ranging from thousands to tens of thousands of amperes. As it operates under high temperature and strong electromagnetic fields for extended periods, and
