"submerged electric arc furnace"
- 14 पाए गए आइटम
1000 वी कम वोल्टेज मुआवजा प्रणाली डुबकी आर्क फर्नेस के लिए
SAF Low Voltage Compensation System Low voltage compensation systems are mainly used in 0.4kV and 0.69kV distribution systems, suitable for refining furnaces, auxiliary equipment, and workshop distribution. National standard GB/T 15576-2020 specifies technical requirements for low-voltage reactive power compensation assemblies.I. General Parameters of Low Voltage Compensation DeviceParameter SpecificationRated Voltage≤1000V (or 1140V) Frequency≤1000 Hz Dynamic Response
जलमग्न आर्क फर्नेस शॉर्ट नेटवर्क सिस्टम एसएएफ फर्नेस / ईएएफ पार्ट्स
Spare Parts Supply for SAF Short Network System The short network is a core component of the power supply system in submerged arc furnaces (SAF). It connects the secondary terminal of the transformer to the electrode copper shoe, undertaking the critical task of transmitting high-current electrical energy into the furnace. The design and manufacturing quality of the short network directly affect the power efficiency, three-phase balance, and operational stability of the SAF.
लौह मिश्र धातु चक्की रिफाइनिंग फर्नेस मध्यम कार्बन कम कार्बन माइक्रो कार्बन
Ferroalloy Refining Electric Furnace Refining furnaces, also known as secondary refining furnaces or ladle refining equipment, are used for deep treatment of molten steel from primary furnaces (EAF, converter, etc.). They aim to improve molten steel purity, adjust composition and temperature, and meet the production requirements of continuous casting and high-quality steel. The ferroalloy refining electric furnace is the main equipment for producing medium-carbon, low-carbon,
फर्नेस शॉर्ट नेटवर्क सिस्टम के लिए पूर्ण विशिष्टताएँ एसएएफ वाटर कूल्ड केबल
Full Specifications Water-Cooled Cable used for Submerged Arc Furnace The water-cooled cable is a key component of the short network system in submerged arc furnaces (SAF). It is used to connect the secondary terminal of the transformer to the movable copper pipe (copper shoe) inside the furnace, transmitting large currents ranging from thousands to tens of thousands of amperes. As it operates under high temperature and strong electromagnetic fields for extended periods, and
स्वचालन डीसीएस नियंत्रण प्रणाली SAF भट्ठी नियंत्रण प्रणाली साइट पर परीक्षण किया
SAF Furnace Control System DCS Automation Control The basic automation level (L1) is the core execution layer of metallurgical control systems, responsible for equipment sequence control, loop regulation, and data acquisition. For submerged arc furnaces and electric arc furnaces, the L1 control system mainly includes two platforms: Programmable Logic Controller (PLC) and Distributed Control System (DCS). The control core of submerged arc furnaces lies in electrode control,
